[Command Sensor] - Vehicle Separation Radar
Product Advantage
Accurately distinguish between people and vehicles, effectively reducing false triggers
Installation height 3-8 metres, covering standard doorways
Operating voltage 12-36 V AC/DC, compatible with a wide range of control systems
Passive relay output, simple wiring, adaptable to mainstream controllers
IP65 rated, dust and splash proof, suitable for outdoor environments
Cable length 6-8 metres, flexible and easy to install
Applicable Scenarios
Rapid rolling door, industrial sliding door, car park entrances and exits, factory gates, cold storage channels and other places that need to distinguish between people and vehicles.
Selection Support
For selection advice or installation guidance, please feel free to contact us.
Vehicle Separation Radar
HERKULES 2E
Product Number:CO-VH-001
Technical parameters:
- Brand: BBC BIRHCER
- Voltage: 12-36 VACDC
- Installation height: 3-8 metres
- Cable length: 8 metres
- Signal output: Passive relay
- Protection class: IP65
Description:Swiss brand, technically stable and reliable.Suitable for all kinds of fast doors, factory entrances and exits, car parks, cold storage and other scenes.
PLUTO
Product Number:CO-VH-002
Technical parameters:
- Brand: GIANTS
- Voltage: 12-36 VACDC
- Installation height: 3-8 metres
- Cable length: 6 metres
- Signal output: Passive relay
- Protection class: IP65
Description:Dual output, technically stable and reliable.Suitable for all kinds of fast doors, factory entrances and exits, car parks, cold storage and other scenes.
BATMAN
Product Number:CO-VH-003
Technical parameters:
- Brand: GIANTS
- Voltage: 12-36 VACDC
- Installation height: 3-7 metres
- Cable length: 6 metres
- Signal output: Passive relay
- Protection class: IP65
Description:single output, technically stable and reliable.Suitable for all kinds of fast doors, factory entrances and exits, car parks, cold storage and other scenes.
📋 Frequently Asked Questions and Troubleshooting
Below are frequently asked questions and troubleshooting methods about man-vehicle separation radar to help you solve problems quickly.
1. Q. How can vehicle-passenger separation radar ensure that people and vehicles are accurately distinguished to avoid false triggering?
Answer: Products passedDoppler radartarget-specificVelocity, volume and reflective properties, combined with algorithms for intelligent analysis. For installation, it is recommended that the sensor be mounted on the3 metres or moreHeight, tilt to30-45°. Meanwhile.Herkules and PlutoIt is possible to set twoIndependent relay outputThe door can be triggered by “vehicle trigger” and “personnel trigger”, which can achieve different logic of vehicle and human control, and effectively avoid the misopening of the door caused by the passing of personnel.
2. Q. How can radar be prevented from being accidentally triggered by crossing pedestrians or passing vehicles?
Answer: radar-enabled“Cross Traffic Override” featureThis feature recognises and filters out only radial motion that is directed straight towards or away from the door. This feature recognises and filters out movement across the detection area from left to right or right to left, and responds only to radial movement straight towards or away from the door, making it particularly suitable for installation alongside roads or at entrances and exits where people move around a lot, and significantly reducing the rate of false triggers.
3. Q. What if the radar does not respond after installation and the door does not open?
Answer: Please troubleshoot in the following order:
- ① Confirm that the power supply voltage is12-36V AC/DCWithin range and wired correctly;
- ② Confirm that the mounting height is at2.5-7.0 metreswithin the scope of the recommendation;
- ③ Check the remote control or APP in“Output Configuration”Is it properly set to respond to the current trigger target (vehicle or person).
The problem is usually solved by completing the above three steps.
4. Q. What can be done when a vehicle has left but the door does not close for a long time?
Answer: It can be adjusted in two ways:
- ① Turn down the volume appropriately with the remote control.“Output hold time”It is recommended that this be set to2-5 seconds；
- ② Turn on the radar of“Leave pulse function”When the vehicle leaves the detection area, the sensor sends out a pulse signal to notify the door controller.Close the door now.The new system has been designed to improve traffic efficiency and reduce energy consumption by eliminating the need to wait for hold times.