[Safety Sensors]-Resistive Safety Contacts

📌 Product Advantage

EPDM material, non-conductive, soft and wear-resistant, approx. 70 Shore A
Resistance value <200Ω (typical) / <500Ω (max), stable and reliable
Equipped with 8.2kΩ resistor plug (0.6W), suitable for mainstream controllers.
Maximum operating voltage 24V AC/DC, safe low voltage
IP67 High degree of protection against short-term water immersion
Conforms to EN 12978 and EN ISO 13856-2 safety standards.
Soft deformation and fast response, hidden support profiles, unobtrusive, suitable for all kinds of door appearance.

🏭 Applicable Scenarios

Industrial sliding door, rapid rolling door, automatic sliding door, equipment guardrail and other contact safety protection scene.

📞 Selection Support

For selection advice or customised lengths, please feel free to contact us.

resistive安full-contact

Resistive Safety Contacts XL-CP Series

Product Number:SD-ELE-001

Technical parameters:

  • EPDM, non-conductive, black / Approx. 70 Shore A
  • Typical <200Ω, Maximum <500Ω
  • Resistance plug: 8.2 kΩ (0.6 W)
  • Maximum operating voltage: 24 V AC/DC
  • Product Standard: EN 12978 and EN ISO 13856-2
  • Protection class: IP67

Description:On gates, safety contact edges protect people from injury as well as vehicles and goods from damage. They must be sensed in advance and remain loose and deformed until the gate drive stops the dangerous manoeuvre and makes a reverse manoeuvre. ExpertSystem XL has therefore been specifically designed for fast response and maximum inertia travel whilst softly deforming. In addition to meeting prescriptive requirements, ExpertSystem XL matches every gate design in an unobtrusive manner with a fully concealed support profile. The EPDM material with excellent longevity maintains good mechanical-technical properties and UV resistance for many years.

Resistive Safety Contacts ELE Series

Product Number:SD-ELE-002

Technical parameters:

  • EPDM, non-conductive, black / Approx. 70 Shore A
  • Typical <200Ω, Maximum <500Ω
  • With ENT-Contact Strip/Resistance Plug: 8.2 kΩ (0.6 W)
  • Maximum operating voltage: 30 V AC/DC
  • Product Standard: EN 12978 and EN ISO 13856-2
  • Protection class: IP67

Description:On gates, safety contact edges protect people from injury as well as vehicles and goods from damage. They must be sensed in advance and remain loose and deformed until the gate drive stops the dangerous manoeuvre and makes a reverse manoeuvre. ELE is therefore specifically designed for fast response and maximum inertia travel whilst softly deforming.