{"id":3597,"date":"2026-04-18T21:53:26","date_gmt":"2026-04-18T13:53:26","guid":{"rendered":"http:\/\/120.55.70.90\/?p=3597"},"modified":"2026-05-09T12:07:08","modified_gmt":"2026-05-09T04:07:08","slug":"instructions-for-the-use-of-a-pull-cord-switch-as-a-door-opening-command","status":"publish","type":"post","link":"https:\/\/www.jufuit.com\/en\/%e6%8b%89%e7%bb%b3%e5%bc%80%e5%85%b3%e4%bd%9c%e4%b8%ba%e5%bc%80%e9%97%a8%e6%8c%87%e4%bb%a4%e7%9a%84%e4%bd%bf%e7%94%a8%e8%af%b4%e6%98%8e\/","title":{"rendered":"Instructions for the use of a pull cord switch as a door opening command"},"content":{"rendered":"<p>Pull rope switch is a kind of control device that triggers the opening command by pulling the rope, widely used in remote opening control of entrance and exit equipments such as rapid rolling shutter door, industrial sliding door, automatic door and so on. The operator does not need to be close to the control box, gently pull the rope to open the door.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">I. Product characteristics<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Easy to operate<\/strong>: Open the door by pulling the rope anywhere in the vicinity of the door, without going near the control box<\/li>\n\n\n\n<li><strong>responsive<\/strong>: Triggered by a light pull, quick response, no delay<\/li>\n\n\n\n<li><strong>simple structure<\/strong>: Purely mechanical or microswitch construction with low failure rate<\/li>\n\n\n\n<li><strong>Flexible installation<\/strong>: Cord can be extended and steered to suit a variety of installation environments<\/li>\n\n\n\n<li><strong>quality-price ratio<\/strong>: Lower cost compared to induction radar, remote control systems<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">II. Installation points<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>fixed position<\/strong>: the switch body is fixed to the door frame or wall at a recommended height of 1.2-1.5 metres.<\/li>\n\n\n\n<li><strong>course<\/strong>: Change of direction by means of pulleys or guide rings to ensure a smooth pulling of the rope<\/li>\n\n\n\n<li><strong>Rope length<\/strong>: not more than 30 metres in one direction, excessive length may affect the trigger sensitivity<\/li>\n\n\n\n<li><strong>Tension Adjustment<\/strong>: Maintain proper tension, neither too loose (failure to trigger) nor too tight (false triggering).<\/li>\n\n\n\n<li><strong>end fixing<\/strong>: Rope ends are fixed in the operating position and need to be secure and reliable.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">III. Wiring instructions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>normally open contact<\/strong>: Usually connected to the door opening signal (NO), closed on pulling<\/li>\n\n\n\n<li><strong>public side<\/strong>: Connect to the common terminal of the controller<\/li>\n\n\n\n<li><strong>Normally Closed Contacts<\/strong>: available for emergency stop signal (NC), triggered on disconnection<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">IV. Routine maintenance<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Rope check<\/strong>: Regularly check ropes for wear and tear, breakage and replace them in a timely manner<\/li>\n\n\n\n<li><strong>Lubrication and maintenance<\/strong>: Regular lubrication of guide wheels, spindles, etc.<\/li>\n\n\n\n<li><strong>Contact Check<\/strong>: Check microswitch contacts for oxidation or jamming<\/li>\n\n\n\n<li><strong>Fixed check<\/strong>: Check for loose switch body and rope fixing ends<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">V. Common Troubleshooting<\/h3>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th>fault phenomenon<\/th><th>Possible causes<\/th><th>cure<\/th><\/tr><tr><td>No response to pull cord<\/td><td>Loose rope\/damaged contacts\/wiring error<\/td><td>Adjust tension\/replace microswitch\/check wiring<\/td><\/tr><tr><td>Automatic door opening without pulling the rope<\/td><td>Over-tightened ropes\/sticky contacts\/mechanical jamming<\/td><td>Adjusting tension\/changing switches\/cleaning foreign objects<\/td><\/tr><tr><td>High resistance to pulling the rope<\/td><td>Guide pulley jamming\/rope wear<\/td><td>Lubrication of guide pulleys\/replacement of ropes<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">VI. Recommendations for selection<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>General industrial doors<\/strong>: standard type with automatic reset, IP54 protection<\/li>\n\n\n\n<li><strong>explosion proof area<\/strong>: Selection of explosion-proof pull rope switches<\/li>\n\n\n\n<li><strong>Outdoor\/wet environment<\/strong>: IP65 protection, stainless steel or cast aluminium housing<\/li>\n\n\n\n<li><strong>Multi-position control<\/strong>: Branch pull cords can be designed to be triggered at multiple points.<\/li>\n<\/ul>\n\n\n\n<p>For advice on pull rope switch selection or technical support, please feel free to contact us.<a href=\"\/en\/contact\/\">Contact Us<\/a>\u3002<\/p>","protected":false},"excerpt":{"rendered":"<p>Pull rope switch is a kind of control device that triggers the opening command by pulling the rope, which is widely used in the remote opening of entrance\/exit equipment such as rapid shutter door, industrial sliding door, automatic door, and...<\/p>","protected":false},"author":1,"featured_media":3494,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[38],"tags":[40],"class_list":["post-3597","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tech-blog","tag-commandsensors"],"_links":{"self":[{"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/posts\/3597","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/comments?post=3597"}],"version-history":[{"count":1,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/posts\/3597\/revisions"}],"predecessor-version":[{"id":3598,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/posts\/3597\/revisions\/3598"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/media\/3494"}],"wp:attachment":[{"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/media?parent=3597"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/categories?post=3597"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.jufuit.com\/en\/wp-json\/wp\/v2\/tags?post=3597"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}